AVK DISMANTLING JOINT WITH CENTRE FLANGE, PN10/16
With tie rods
Sales Enquiries
Please email all sales enquiries to the address below
Dismantling joint with tie rods & centre flange for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° and below.
AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps.where a single tie-rod is required from the upstream to downstream sides of the pipe equipment installation. These fittings also allow for axial displacement of pipework during installation and dismantling.
| Variant 265/50-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Steel |
| DN: | DN300 - DN2200 |
| PN: | PN 16 |
Features
- Compensates for axial displacement of the pipe during installation and dismantling, as the telescopic action between the inner and outer flange body allows for longitudinal adjustment
- Designed with three flanges connected with tie-rods, and where the centre flange applies compression on the seal through the tie-rods
- Axial adjustment on length (see table)
- Can be used for up to -0.8 Bar negative pressure
- Mild steel with fusion bonded epoxy coating to WIS 4-52-01
- Tie-rods of zinc plated and passivated steel 4.6 located on every flange hole
- Optionally with tie-rods of stainless steel A2 or acid-resistant stainless steel A4
- Fast-track delivery service
- Embodied Carbon data available upon request
- PN25 Option
Downloads
Datasheet
Certificate(s)
Installation, Operation & Maintenance
Price list
Reference nos. and dimensions:
Scroll for more info
| Ref. no. | DN mm |
Flange drillling |
D mm |
E mm |
L11 mm |
L mm |
L8 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|
| 265-50-0300-11 | 300 | PN16 | 460 | 410 | 280 | 450 | 40 | 85 |
| 265-50-0350-11 | 350 | PN16 | 520 | 470 | 280 | 450 | 40 | 115 |
| 265-50-0400-11 | 400 | PN16 | 580 | 525 | 280 | 450 | 40 | 156 |
| 265-50-0450-11 | 450 | PN16 | 640 | 585 | 330 | 550 | 50 | 213 |
| 265-50-0500-11 | 500 | PN16 | 715 | 650 | 330 | 550 | 50 | 273 |
| 265-50-0600-11 | 600 | PN16 | 840 | 770 | 330 | 550 | 50 | 342 |
| 265-50-0700-11 | 700 | PN16 | 910 | 840 | 330 | 550 | 50 | 342 |
| 265-50-0800-11 | 800 | PN16 | 1025 | 950 | 400 | 670 | 60 | 499 |
| 265-50-1000-11 | 1000 | PN16 | 1255 | 1170 | 400 | 670 | 60 | 900 |
| 265-50-1200-11 | 1200 | PN16 | 1485 | 1390 | 450 | 750 | 70 | 1032 |
| 265-50-1400-11 | 1400 | PN16 | 1685 | 1590 | 500 | 800 | 75 | 1244 |
| 265-50-1600-11 | 1600 | PN16 | 1930 | 1820 | 500 | 830 | 75 | 1315 |
| 265-50-1800-11 | 1800 | PN16 | 2130 | 2020 | 600 | 930 | 80 | 1551 |
| 265-50-2000-11 | 2000 | PN16 | 2230 | 2230 | 600 | 950 | 80 | 2066 |
| 265-50-2200-01 | 2200 | PN10 | 2550 | 2440 | 600 | 950 | 80 | 2098 |
Enquiry
Scroll for more info
Components
| 1. | Flange | Mild steel |
| 2. | Center flange | Mild steel |
| 3. | Flange | Mild steel |
| 4. | Seal | EPDM |
| 5. | Tie-rod, nut and washer | Zinc plated 4.6 steel |
Test/Approvals
- Tested according to BS8561-2013
- Belgaqua approved material
- Type tested to 1.5 X PN
- Made in Great Britain
Standards
- Standard flange drilling to EN1092, PN 10/16
